Daytime running light installation

1) Install the daytime running light to the bracket.

Tightening torque: 1.7 N・m { 0.2 kgf・m / 15.0 lb・in }

Legend

2) Install the bracket to the front bumper.

1) Install the inner liner to the front fender panel.

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.