Headlight auto leveling control unit removal

1. Headlight auto leveling control unit safety information

Caution

  • After replacing the headlight auto leveling control unit, be sure to perform initial learning of the headlight auto leveling control unit.

2. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

3. Console box removal

4. Center console removal

1. Except models with console boxes

1) Remove the extension of the center console from the center console.

Legend

  1. Center console
  2. Extension

5. Headlight auto leveling control unit removal

1) Disconnect the connector from the headlight auto leveling control unit.

2) Remove the headlight auto leveling control unit from the floor.

Legend

  1. Headlight auto leveling control unit