1. Rear door speaker installation
1) Install the rear door speaker to the rear door.
Tightening torque: 0.8 N・m { 0.08 kgf・m / 7.1 lb・in }
Legend
- Rear door speaker
- Screw
2) Connect the connector to the rear door speaker.
Legend
- Screw
- Rear door speaker
- Connector
- Harness clip
2. Rear door trim pad installation
1) Connect the door lock cable to the inside lever.
2) Install the rear door trim pad to the rear door.
Caution
- When installing, be careful not to let the door lock cover open because the door lock cable is connected to the inside lever.
Legend
- Door lock (When the cover is closed)
- Door lock cable
- Door lock (When the cover is opened)
3) Tighten the screws, and install the cover and garnish.
Tightening torque: 2.0 N・m { 0.2 kgf・m / 18 lb・in }
4) Install the rear door upper cover to the rear door.
Legend
- Rear door upper cover
- Clip position
- Screw
- Cover
- Garnish
3. Rear door power window switch installation
1) Connect the connector to the rear door power window switch.
2) Install the rear door power window switch to the rear door trim pad.
Legend
- Rear door power window switch
- Claw section
3) Install the armrest to the rear door trim pad.
Legend
- Armrest
4. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.