Instrument panel removal

1. Component views

Instrument panel (High grade type)

Part name

  1. Ventilation duct
  2. Center ventilation duct
  3. Defroster nozzle
  4. Heater evaporator unit
  5. Reinforcement
  6. Instrument panel (Upper side)
  7. Antenna
  8. Passenger airbag
  9. Instrument panel (Lower side)
  10. Side cover
  11. Instrument panel driver-side lower cover
  12. Instrument panel cluster
  13. Meter cluster
  14. Steering upper cowl
  15. Steering lower cowl
  16. Instrument panel (Middle side)
  17. Center console
  18. Control panel
  19. Audio center unit
  20. Bezel
  21. Audio
  22. Glove box
  23. Instrument panel passenger-side lower cover
  24. Instrument panel passenger-side upper cover

Instrument panel (Low grade type)

Part name

  1. Ventilation duct
  2. Center ventilation duct
  3. Defroster nozzle
  4. Heater evaporator unit
  5. Reinforcement
  6. Instrument panel (Upper side)
  7. Passenger airbag
  8. Instrument panel (Lower side)
  9. Side cover
  10. Instrument panel driver-side lower cover
  11. Glove box
  12. Instrument panel passenger-side lower cover
  13. Instrument panel cluster
  14. Meter cluster
  15. Steering upper cowl
  16. Steering lower cowl
  17. Instrument panel (Middle side)
  18. Center console
  19. Control panel
  20. Bezel
  21. Instrument panel passenger-side upper cover

2. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

3. Front sill plate removal

1) Remove the front sill plate from the floor.

Regular cab, crew cab

Legend

  1. Front sill plate
  2. Clip
  3. Claw section

Extend cab

Legend

  1. Front sill plate
  2. Clip
  3. Claw section

4. Front door finisher removal

1) Remove the front door finisher from the body.

5. Front pillar trim cover removal

1. Models with assist grips

1) Remove the assist grip from the front pillar trim cover.

2) Remove the front pillar trim cover from the front pillar.

Legend

  1. Front pillar trim cover
  2. Assist grip

2. Models without assist grips

1) Remove the front pillar trim cover from the front pillar.

Legend

  1. Front pillar trim cover
  2. Clip

6. Knee air bag removal

1. Models with knee airbags

Refer to "8.Restraints 8B.Airbag Systems knee air bag removal".

7. Instrument panel driver-side lower cover removal

1. Models with knee airbags

1) Disconnect the wire from each lever.

2) Remove the hood lock control lever and fuel filler lid opener lever from the instrument panel driver-side lower cover.

Note

  • Press the claw section and pull out each lever.

RHD

Legend

  1. Hood lock control lever
  2. Fuel filler lid opener lever
  3. Claw section

LHD

Legend

  1. Fuel filler lid opener lever
  2. Hood lock control lever
  3. Claw section

3) Remove the instrument panel driver-side lower cover from the instrument panel.

RHD

Legend

  1. Instrument panel driver-side lower cover

LHD

Legend

  1. Instrument panel driver-side lower cover

4) Remove the connector from the instrument panel driver-side lower cover.

2. Models without knee airbags

1) Disconnect the wire from each lever.

2) Remove the hood lock control lever and fuel filler lid opener lever from the instrument panel driver-side lower cover.

Note

  • Press the claw section and pull out each lever.

RHD

Legend

  1. Hood lock control lever
  2. Fuel filler lid opener lever
  3. Claw section

LHD

Legend

  1. Fuel filler lid opener lever
  2. Hood lock control lever
  3. Claw section

3) Remove the instrument panel driver-side lower cover from the instrument panel.

RHD

Legend

  1. Instrument panel driver-side lower cover

LHD

Legend

  1. Instrument panel driver-side lower cover

4) Remove the connector from the instrument panel driver-side lower cover.

8. Glove box removal

1) Remove the glove box from the instrument panel.

RHD

Legend

  1. Glove box

LHD

Legend

  1. Glove box

9. Instrument panel passenger-side lower cover removal

1) Remove the instrument panel passenger-side lower cover from the instrument panel.

RHD

Legend

  1. Instrument panel passenger-side lower cover
  2. Clip

LHD

Legend

  1. Instrument panel passenger-side lower cover
  2. Clip

2) Disconnect the connector from the instrument panel passenger-side lower cover.

10. Audio and navigation system removal

1. Models equipped with display units

1) Remove the display unit as a set with the bezel from the instrument panel.

Caution

  • When removing the display unit, place a cloth to the instrument panel.
  • If a cloth is not used, the surface of the instrument panel may be damaged.

Legend

  1. Bezel
  2. Display unit
  3. Clip

2) Disconnect the connector from the display unit.

3) Remove the audio center unit from the instrument panel.

Legend

  1. Audio center unit

4) Disconnect the connector from the audio center unit.

2. Models equipped with 2DIN audio

1) Remove the 2DIN audio as a set with the bezel from the instrument panel.

Caution

  • When removing the 2DIN audio, place a cloth to the instrument panel.
  • If a cloth is not used, the surface of the instrument panel may be damaged.

Legend

  1. Bezel
  2. 2DIN audio
  3. Clip

2) Disconnect the connector from the 2DIN audio.

3) Remove the bracket from the instrument panel.

Legend

  1. Bracket

11. Instrument panel passenger-side upper cover removal

1) Remove the instrument panel passenger-side upper cover from the instrument panel.

High grade type (RHD)

Legend

  1. Instrument panel passenger-side upper cover
  2. Screw

High grade type (LHD)

Legend

  1. Instrument panel passenger-side upper cover
  2. Screw

Low grade type (RHD)

Legend

  1. Instrument panel passenger-side upper cover

Low grade type (LHD)

Legend

  1. Instrument panel passenger-side upper cover

12. Meter cluster removal

1) Remove the meter cluster from the instrument panel.

RHD

Legend

  1. Clip
  2. Claw section

LHD

Legend

  1. Clip
  2. Claw section

13. Instrument panel cluster removal

1) Remove the instrument panel cluster from the instrument panel.

Legend

  1. Instrument panel cluster

2) Disconnect the connector from the instrument panel cluster.

14. Control panel and control lever removal

1. Models with manual A/C

1) Remove the instrument panel (middle side) from the instrument panel (lower side).

RHD

Legend

  1. Instrument panel (Middle side)
  2. Clip

LHD

Legend

  1. Instrument panel (Middle side)
  2. Clip

2) Disconnect the control cable from the lock clamp section.

3) Disconnect the control cable from the intake lever.

RHD

Legend

  1. Lock clamp
  2. Intake lever
  3. Blower
  4. Control cable

LHD

Legend

  1. Control cable
  2. Intake lever
  3. Lock clamp
  4. Blower

4) Remove the control lever from the instrument panel.

5) Disconnect the connector from the control lever.

Legend

  1. Control lever

2. Models with auto A/C

1) Remove the instrument panel (middle side) from the instrument panel (lower side).

RHD

Legend

  1. Instrument panel (Middle side)
  2. Clip

LHD

Legend

  1. Instrument panel (Middle side)
  2. Clip

2) Remove the control panel from the instrument panel.

3) Disconnect the connector from the control panel.

Legend

  1. Control panel

15. Center console removal

1) Remove the center console from the instrument panel.

Models with console boxes

Legend

  1. Center console

Except models with console boxes

Legend

  1. Center console
  2. Extension

2) Disconnect the connector from the center console.

16. Shift console cover removal

1. A/T models

1) Remove the selector lever knob from the selector lever.

Note

  • Lower the selector lever boot from the selector lever knob, and pull out the clip from the bottom of the selector lever knob.

Legend

  1. Clip

2) Remove the pads from the console box.

Legend

  1. Pad
  2. Clip position

3) Remove the shift console cover from the console box.

4) Disconnect the connector from the shift console cover.

2. M/T models

1) Remove the shift knob from the shift lever.

2) Remove the pads from the console box.

Legend

  1. Pad
  2. Clip position

3) Remove the shift console cover from the console box.

4) Disconnect the connector from the shift console cover.

17. Console box removal

1) Remove the cup holder from the console cover.

2) Remove the console cover from the console box.

3) Remove the console box from the floor.

4) Disconnect the connector from the console box.

Legend

  1. Cup holder
  2. Console cover
  3. Screw
  4. Console box
  5. Clip

18. CD/DVD player removal

1) Remove the CD/DVD player from the instrument panel.

Legend

  1. CD/DVD player
  2. Screw

2) Disconnect the connector from the CD/DVD player.

3) Remove the bracket from the instrument panel.

Legend

  1. Bracket
  2. Screw

19. Instrument panel removal

1) Remove the side cover from the instrument panel.

Legend

  1. Side cover
  2. Claw section

2) Disconnect the passenger airbag from the reinforcement.

3) Disconnect the connector from the instrument panel (upper side).

4) Remove the instrument panel (upper side) from the instrument panel (lower side).

High grade type

Legend

  1. Instrument panel (Upper side)
  2. Clip
  3. Claw section

Low grade type

Legend

  1. Instrument panel (Upper side)
  2. Clip
  3. Claw section

5) Remove the junction block from the instrument panel (lower side).

Legend

  1. Junction block

6) Disconnect the connector and aspirator hose from the inside air temperature sensor.

7) Remove the harness clip from the instrument panel (lower side).

8) Remove the instrument panel (lower side) from the reinforcement.

Legend

  1. Instrument panel (Lower side)
  2. Screw
  3. Tapping screw