1. Charge air cooler temperature sensor 1 installation
1) Install charge air cooler temperature sensor 1 to the intercooler.
Tightening torque: 14 N・m { 1.4 kgf・m / 124 lb・in }
Legend
- Charge air cooler temperature sensor 1
- Intercooler
2) Connect the connector to charge air cooler temperature sensor 1.
2. Front bumper installation
1) Install the front bumper to the vehicle.
Legend
- Front bumper
- Clip
2) Install the front bumper support to vehicle.
3) Install the soft nose to the front bumper support.
Legend
- Clip
- Screw
- Soft nose
- Front bumper support
4) Connect the connector to the front bumper.
5) Install the intake air duct to the air cleaner box and radiator core support.
Legend
- Intake air duct
- Clip
3. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.