1. Instrument panel cluster safety information
If replacing the instrument panel cluster, it is necessary to write the vehicle information into the new instrument panel cluster.
When replacing the instrument panel cluster, before removal upload the old instrument panel cluster data to a scan tool, referring to the following.
During the replacement procedure, the same scan tool must be used from start to finish. If the scan tool is changed midway, information cannot be written correctly.
2. Instrument panel cluster setting
1. Vehicle information download
Only when communication between the old instrument panel cluster and the scan tool can be established, perform the vehicle information download.
Caution
- Make sure to check the vehicle specification before performing the download.
1) Connect the scan tool to the DLC.
2) Turn ON the ignition switch.
3) Select "Download Vehicle Configuration Data" on the scan tool.
- Diagnostics > Body > Meter > Programming > Download Vehicle Configuration Data
4) Download the vehicle data to the instrument panel cluster by following the on-screen instructions.
5) Turn OFF the ignition switch for 30 seconds.
6) Select "Module Information" on the scan tool.
- Diagnostics > Body > Meter > Module Information
7) Make sure to check that the stored vehicle information has been programmed before replacing the instrument panel cluster.
8) Turn OFF the ignition switch for 30 seconds.
9) Turn ON the ignition switch.
10) Check display of the meter.
Note
- If the data is not written into the instrument panel cluster, the instrument panel cluster will flash the following warning light when the ignition switch is ON.
- If it flashes, the instrument panel cluster will not function. Check that the displays do not flash after writing.
2. Vehicle information programming
If communication between the old instrument panel cluster and the scan tool could not be established, it is necessary to set the vehicle data into the instrument panel cluster.
1) Connect the scan tool to the DLC.
2) Turn ON the ignition switch.
3) Turn ON the scan tool.
4) Select "Vehicle Configuration Setting" on the scan tool.
- Diagnostics > Body > Meter > Programming > Program Vehicle Configuration Data
5) Program the vehicle data by following the on-screen instructions.
Caution
- Referring to the following list, perform programming.
| Setting Item |
Setting Value |
Note |
| Brand |
ISUZU |
Select a vehicle manufacturer. |
| CAB Style |
REGULAR |
Select a vehicle type. |
| EXTEND |
||
| CREW |
||
| Fuel Tank Capacity |
76 (L) |
Select 76(L) for all the vehicles. |
| 80 (L) |
||
| Transmission Type |
MT |
Select the transmission type. |
| AT |
||
| Maintenance Remainder Distance of Engine |
10,000 km |
For Thailand |
| 15,000 km |
For Australia |
|
| 20,000 km |
Except for Thailand and Australia |
|
| Maintenance Remainder Distance of Air Cleaner Element |
40,000 km |
Except for Australia |
| 45,000 km |
For Australia |
|
| Language Setting |
English |
Select the language to use. |
| Thai |
||
| Turkish |
||
| Spanish |
||
| Arabic |
||
| Portuguese |
||
| German |
||
| French |
||
| Russian |
||
| Italian |
||
| CRUISE System |
Not Available |
Models without cruise system |
| Constant Speed Cruise |
Models with cruise control |
|
| ACC |
Models with adaptive cruise control |
|
| TPMS System |
Not Available |
Models without TPMS |
| Monitoring Type |
Models with TPMS |
|
| Over Speed Warning |
Not Available |
Select ON/OFF of the speed warning function. |
| Speed Alarm 120 km/h |
||
| Speed Alarm 80 km/h and 120 km/h |
||
| Drive System |
2WD |
Select a vehicle drive system. |
| 4WD |
||
| Seat Belt Reminder System Front Seat |
Not Available |
For models with front seat belt reminders, select Available. |
| Available |
||
| Seat Belt Reminder System 2nd Seat |
Not Available |
For crew cab models with rear seat belt reminders, select Available. |
| Available |
||
| Seat Belt Reminder System 3rd Seat or Extend 2nd Seat |
Not Available |
For extend cab models with rear seat belt reminders, select Available. |
| Available |
||
| Passive Entry and Start System |
Not Available |
Models without the passive entry and start system |
| Available |
Models with the passive entry and start system |
|
| CALENDER Display Default Select |
DD.MM.YY |
Select the calendar display type. |
| YY.MM.DD |
||
| Back Shift Buzzer |
Except 6 Speed MT |
Except 6-speed MT models |
| 6 Speed MT |
6-speed MT models |
|
| BCM Control System |
Without BCM (Body Control Module) |
Models without BCM |
| With BCM (Body Control Module) |
Models with BCM |
|
| Charge Warning Control Input |
Without IBS (Intelligent Battery System) |
Models without battery sensors |
| With IBS (Intelligent Battery System) |
Models with battery sensors |
|
| Front Fog Lamp Indicator |
Not Available |
Models without front fog lights |
| Available |
Models with front fog lights |
|
| Rear Fog Lamp Indicator |
Not Available |
Models without rear fog lights |
| Available |
Models with rear fog lights |
|
| GLOW Indicator |
Not Available (for Thai) |
For Thailand |
| Available |
Except for Thailand |
|
| SVS Warning |
Not Available (Euro2 OPTION: NT2) |
Euro0 - Euro3 models |
| Available (Euro4 - Euro6d OPTION: NT4/NT5/NT6/8SJ) |
Euro4 - Euro6d models |
|
| DPD Warning |
Not Available |
Models without DPD |
| Available |
Models with DPD |
|
| SCR Warning |
Not Available |
Models without urea SCR system |
| Available |
Models with urea SCR system |
|
| SRS Warning |
Not Available |
Models without SRS airbags |
| Available |
Models with SRS airbags |
|
| ABS Warning |
Not Available |
Models without ABS |
| Available |
Models with ABS |
|
| ESC Warning |
Not Available |
Models without ESC |
| Available |
Models with ESC |
|
| ISS Indicator |
Not Available |
Models without idling stop system |
| Available |
Models with idling stop system |
|
| Auto Hi Beam Indicator |
Not Available |
Models without automatic high beam |
| Available |
Models with automatic high beam |
|
| LED Head Lamp Warning |
Not Available |
Models with halogen headlights |
| Available |
Models with LED headlights |
|
| Head Lamp Auto Leveling Warning |
Not Available |
Models without headlight auto leveling system |
| Available |
Models with headlight auto leveling system |
|
| Diff Lock Indicator and Warning |
Not Available |
Models without differential lock |
| 4WD/2WD (CAN) |
Models with differential locks |
|
| BSD OFF Indicator |
Not Available |
Models without radar sensors |
| Available |
Models with radar sensors |
|
| PARKING AID OFF Indicator |
Not Available |
Models without parking aid system |
| Available |
Models with parking aid system |
|
| EPS Warning |
Not Available |
Hydraulic power steering models |
| Available |
Electric power steering models |
|
| AEB OFF Indicator |
Not Available |
Models without AEB |
| Available |
Models with AEB |
|
| Bench Seat |
Not Available |
Except models with bench seats |
| Available |
Models with bench seats |
|
| Door Open Buzzer |
Not Available |
The door open buzzer is not activated. |
| Available |
The door open buzzer is activated. |
|
| LSS Indicator |
Not Available |
Models without lane support system |
| Available |
Models with lane support system |
|
| EPB Indicator and Warning |
Not Available |
Models without electric parking brake system |
| Hill Descent Indicator |
Not Available |
Models without ESC |
| Available |
Models with ESC |
|
| Rear Gate Ajar Warning |
Not Available |
|
| Oil Level Warning |
Without SCR |
Models without urea SCR system |
| With SCR |
Models with urea SCR system |
|
| Off Load Mode Indicator |
Not Available |
|
| Drive Handle |
RHD |
RHD models |
| LHD |
LHD models |
|
| Engine Type |
RZ4E-TC (Mid-Power 150PS) |
Models with option code "RDZ" |
| RZ4E-TCX (Hi-Power 163PS) |
Models with option code "LNC" |
|
| RZ4E-TCN (Std-Power 116PS) |
Models with option code "LNF" |
|
| 4JJ3 (190PS) |
Models with option code "LNG" |
|
| Transmission Gear Ratio |
MUA-5H (5-SPEED MT) |
Models with option code "MWQ" |
| MVL-6Y (6-SPEED MT) |
Models with option code "Y6P" |
|
| MVL-6S (6-SPEED MT) |
Models with option code "Y6S" |
|
| AWR6B45-II (AISIN, 6-SPEED AT) |
Models with option code "Y6A" |
|
| Tire Dynamic Load Radius |
195R15C |
Models with option code "QZO" |
| 215/70R15 |
Models with option code "QBQ" |
|
| 215/70R16 |
Models with option code "QZY" |
|
| 205R16 |
Models with option code "CUY" |
|
| 255/65R17 |
Models with option code "QZX"/"FNE" |
|
| 265/60R18, BS(H/T Tire Pattern 684 II) |
Models with option code "FPF" |
|
| 265/60R18, DL(A/T Tire Pattern AT25) |
Models with option code "FPG" |
|
| Final Gear Ratio |
3.416 (41/12) |
Models with option code "GU6" |
| 3.583 (43/12) |
Models with option code "GM0" |
|
| 3.727 (41/11) |
Models with option code "GT4" |
|
| 3.909 (43/11) |
Models with option code "GW1" |
|
| 4.100 (41/10) |
Models with option code "GT5" |
|
| 4.300 (43/10) |
Models with option code "GY2" |
|
| 4.555 (41/9) |
Models with option code "GT3" |
6) Select "Module Information" on the scan tool.
- Diagnostics > Body > Meter > Module Information
7) Make sure to check that the stored vehicle information has been programmed before replacing the instrument panel cluster.
8) Turn OFF the ignition switch for 30 seconds.
9) Turn ON the ignition switch.
10) Check display of the meter.
Note
- If the data is not written into the instrument panel cluster, the instrument panel cluster will flash the following warning light when the ignition switch is ON.
- If it flashes, the instrument panel cluster will not function. Check that the displays do not flash after writing.
3. Vehicle identification number (VIN) programming
1) Connect the scan tool to the DLC.
2) Turn ON the ignition switch.
3) Select "Program VIN (Vehicle Identification Number)" on the scan tool.
- Diagnostics > Body > Meter > Programming > Program VIN (Vehicle Identification Number)
4) Following the on-screen instructions, operate the scan tool to program the VIN into the control panel.
Note
- Input the VIN indicated on the vehicle ID plate.
4. DTC verification/clearing
1) Observe the DTC information with a scan tool.
2) If a DTC is set, clear the DTC.
3) Turn OFF the ignition switch.
4) Turn ON the ignition switch.
5) Observe the DTC information with a scan tool.
6) If a DTC is set, go to the applicable diagnosis.