Passenger seat reassembly

1. Component views

Manual control seat (Without height control, separate headrest type)

Part name

  1. Headrest holder
  2. Front seat headrest
  3. Front seat back cover
  4. Front seat back pad
  5. Front seat back frame
  6. Bolt
  7. Reclining lever
  8. Reclining cover
  9. Nut
  10. Front seat cushion frame
  11. Bolt
  12. Seat slide adjuster
  13. Front buckle side seat belt
  14. Bolt
  15. Side cover
  16. Front seat cushion pad
  17. Front seat cushion cover
  18. Seat belt reminder sensor

Tightening torque

6: 46 N・m { 4.7 kgf・m / 34 lb・ft }

9: 21 N・m { 2.1 kgf・m / 15 lb・ft }

11: 46 N・m { 4.7 kgf・m / 34 lb・ft }

14: 40 N・m { 4.1 kgf・m / 30 lb・ft }

Bench seat

Part name

  1. Front seat back cover
  2. Front seat back pad
  3. Front seat back frame
  4. Bolt
  5. Reclining lever
  6. Screw
  7. Leg cover
  8. Reclining cover
  9. Bolt
  10. Front seat cushion frame
  11. Side cover
  12. Front seat cushion pad
  13. Front seat cushion cover
  14. Seat belt reminder sensor (center)
  15. Seat belt reminder sensor (LH)

Tightening torque

4: 46 N・m { 4.7 kgf・m / 34 lb・ft }

9: 46 N・m { 4.7 kgf・m / 34 lb・ft }

2. Seat slide adjuster installation

1. Bucket seat

1) Install the seat slide adjuster to the seat cushion frame.

Tightening torque: 21 N・m { 2.1 kgf・m / 15 lb・ft }

2) Install the cover to the seat cushion frame.

Legend

  1. Cover
  2. Seat cushion frame
  3. Seat slide adjuster

3. Seat cushion reassembly

1) Install the seat cushion cover to the seat cushion pad using hog ring pliers.

Caution

  • Install the seat cushion cover to the seat cushion pad so as not to form wrinkles.
  • Do not reuse the hog ring.

Note

  • Referring to the diagram, install the hog ring.

Bucket seat

Legend

  1. Hog ring
  2. Seat cushion cover
  3. Seat cushion pad
  4. Seat cushion cover
  5. Hog ring
  6. Seat cushion pad

Bench seat

Legend

  1. Hog ring
  2. Seat cushion cover
  3. Seat cushion pad
  4. Seat cushion cover
  5. Hog ring
  6. Seat cushion pad

2) Press the seat cushion cover and install to the fastener on the seat cushion pad side.

4. Seat cushion installation

1) Insert the seat cushion cover of the seat cushion rear end into the gap between the seat cushion and the seat back, and install the seat cushion to the seat frame.

Bucket seat

Legend

  1. Seat cushion
  2. Seat frame

Bench seat

Legend

  1. Seat cushion
  2. Seat frame

2) Install the resin hook of the seat cushion cover to the seat frame.

3) Connect the connector as necessary.

5. Front seat back reassembly

1. Models without side airbags

1) Install the front seat back cover to the front seat back pad using hog ring pliers.

Caution

  • Install the front seat back cover to the front seat back pad so as not to form wrinkles.
  • Do not reuse the hog ring.

Note

  • Referring to the diagram, install the hog ring.

Bucket seat front side

Legend

  1. Front seat back cover
  2. Front seat back pad
  3. Hog ring
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

Bench seat front side

Legend

  1. Front seat back cover
  2. Front seat back pad
  3. Hog ring
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

Bucket seat back side

Legend

  1. Hog ring
  2. Front seat back cover
  3. Front seat back pad
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

Bench seat back side

Legend

  1. Hog ring
  2. Front seat back cover
  3. Front seat back pad
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

2) Press the front seat back cover and install to the fastener on the front seat back pad side.

3) Install the front seat back cover and front seat back pad to the front seat back frame.

Bucket seat

Legend

  1. Front seat back cover and front seat back pad
  2. Front seat back frame

Bench seat

Legend

  1. Front seat back cover and front seat back pad
  2. Front seat back frame

6. Front seat back installation

1) Install the front seat back to the front seat frame.

Tightening torque: 46 N・m { 4.7 kgf・m / 34 lb・ft }

Bucket seat

Legend

  1. Front seat back
  2. Front seat frame

Bench seat

Legend

  1. Front seat back

2) For models with seat heaters, connect the connector.

3) Install the headrest holder to the front seat back.

Caution

  • Install the headrest holder with a lock function to the left side.

Bucket seat

Legend

  1. Headrest holder (RH)
  2. Headrest holder (LH)
  3. Front seat back

7. Reclining cover installation

1) Install the reclining cover and side cover to the passenger seat.

Bucket seat

Legend

  1. Reclining lever
  2. Reclining cover
  3. Side cover

Bench seat

Legend

  1. Side cover
  2. Reclining cover
  3. Reclining lever

2) Install the reclining lever to the passenger seat.

8. Front buckle side seat belt installation

1. Bucket seat

1) Install the front buckle side seat belt to the seat.

Tightening torque: 40 N・m { 4.1 kgf・m / 30 lb・ft }

Left side

Legend

  1. Front buckle side seat belt

2) Install the seat belt switch harness to the seat.

3) Connect the connector to the front buckle side seat belt.

9. Front seat headrest installation

1) Install the front seat headrest to the passenger seat.

Copyright Mazda Motor Corporation. All rights reserved.