Brake master cylinder reassembly

1. Component views

Brake master cylinder

Part name

  1. Cap
  2. Diaphragm
  3. Filter
  4. Master cylinder

2. Brake master cylinder reassembly

1) Install the filter to the reservoir tank.

2) Install the diaphragm to the cap.

3) Install the cap to the reservoir tank.

4) Install the O-ring to the brake master cylinder.

Caution

  • Do not reuse the O-ring if replacing the brake booster.

Legend

  1. Cap
  2. Diaphragm
  3. Filter
  4. O-ring
Copyright Mazda Motor Corporation. All rights reserved.