Oil level sensor installation (4JJ3 with DPD)

1) Install the oil level sensor to the crankcase.

Tightening torque: 66 N・m { 6.7 kgf・m / 49 lb・ft }

Legend

2) Connect the connector to the oil level sensor.

1) Apply engine oil to the O-ring.

2) Install the oil level gauge guide tube to the crankcase.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

3) Install the oil level gauge to the oil level gauge guide tube.

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.