Rear end trim cover installation

1. Component views

Regular cab

Part name

  1. Front pillar trim cover
  2. Front door finisher
  3. Front tongue side seat belt
  4. Rear pillar upper trim cover
  5. Rear end upper trim cover
  6. Rear end trim cover
  7. Rear pillar lower trim cover
  8. Front sill plate
  9. Dash side trim pad

Crew cab

Part name

  1. Front pillar trim cover
  2. Front door finisher
  3. Front tongue side seat belt
  4. Center pillar upper trim cover
  5. Assist grip
  6. Rear door finisher
  7. Rear upper trim cover
  8. Rear lower trim cover
  9. Rear end upper trim cover
  10. Rear end trim cover
  11. Rear tongue side seat belt
  12. Rear tongue side center seat belt
  13. Rear sill plate
  14. Center pillar lower trim cover
  15. Front sill plate
  16. Assist grip
  17. Dash side trim pad

Extend cab

Part name

  1. Front pillar trim cover
  2. Front door finisher
  3. Rear tongue side seat belt
  4. Rear pillar upper trim cover
  5. Rear end trim cover
  6. Rear pillar lower trim cover
  7. Front sill plate
  8. Assist grip
  9. Dash side trim pad

2. Rear end trim cover installation

1) Install the rear end trim cover to the body panel.

Regular cab

Legend

  1. Rear end trim cover
  2. Hook hole
  3. Push clip

Crew cab

Legend

  1. Rear end trim cover
  2. Hook hole
  3. Push clip

Extend cab

Legend

  1. Rear end trim cover
  2. Clip
  3. Hook
  4. Claw section

3. Rear pillar trim cover installation

1. Regular cab

1) Install the rear pillar lower trim cover to the rear pillar.

Legend

  1. Claw section
  2. Rear pillar lower trim cover
  3. Clip

2) Install the seat belt lower anchor bolt to the rear pillar.

Tightening torque: 46 N・m { 4.7 kgf・m / 34 lb・ft }

Legend

  1. Seat belt lower anchor bolt

2. Crew cab

1) Install the rear pillar lower trim cover to the rear pillar.

Legend

  1. Claw section
  2. Rear pillar lower trim cover
  3. Clip

4. Rear end upper trim cover installation

1. Regular cab

1) Install the rear end upper trim cover to the body panel.

Legend

  1. Claw section
  2. Rear end upper trim cover
  3. Clip
  4. Hook

2. Crew cab

1) Install the rear end upper trim cover to the body panel.

Caution

  • For models with center top tethers (bracket type), install while bending the end of the rear end upper trim to an extent that it will not get damaged.

Models with center top tethers (bracket type)

Legend

  1. Seat belt guide cover
  2. Rear end upper trim cover
  3. Clip
  4. Claw section
  5. Hook
  6. Bend the end of the rear end upper trim cover.
  7. Install the rear end upper trim.
  8. Center top tether (Bracket type)

Models without center top tethers (bracket type)

Legend

  1. Seat belt guide cover
  2. Rear end upper trim cover
  3. Clip
  4. Claw section
  5. Hook

5. Rear door finisher installation

1. Crew cab

1) Install the rear door finisher to the body.

6. Rear sill plate installation

1. Crew cab

1) Install the rear sill plate to the floor.

Legend

  1. Rear sill plate
  2. Clip
  3. Claw section

7. Front door finisher installation

1. Regular cab

1) Install the front door finisher to the body.

8. Front sill plate installation

1. Regular cab

1) Install the front sill plate to the floor.

Legend

  1. Front sill plate
  2. Clip
  3. Claw section
Copyright Mazda Motor Corporation. All rights reserved.