1. Information module installation
1) Install the information module to the dash side panel.
Tightening torque: 6.6 N・m { 0.7 kgf・m / 58 lb・in }
RHD
Legend
- Information module
LHD
Legend
- Information module
2) Connect the connector to the information module.
2. BCM installation
1. Models with BCM
1) Install the BCM to the dash side panel.
Tightening torque: 9.4 N・m { 1.0 kgf・m / 83 lb・in }
RHD
Legend
- BCM
LHD
Legend
- BCM
3. Dash side trim pad installation
1) Install the dash side trim pad to the body.
Right side
Legend
- Dash side trim pad
- Retainer
- Clip
Left side
Legend
- Dash side trim pad
- Retainer
- Clip
4. Front door finisher installation
1) Install the front door finisher to the body.
5. Front sill plate installation
1) Install the front sill plate to the floor.
Regular cab, crew cab
Legend
- Front sill plate
- Clip
- Claw section
Extend cab
Legend
- Front sill plate
- Clip
- Claw section
6. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.