Washer tank installation

Part name

Tightening torque

2: 5.9 N・m { 0.6 kgf・m / 52 lb・in }

1) Install the washer tank to vehicle.

Tightening torque: 5.9 N・m { 0.6 kgf・m / 52 lb・in }

2) Connect the connector to the washer motor.

Legend

3) Install the tank joint to the washer tank.

Tightening torque: 5.9 N・m { 0.6 kgf・m / 52 lb・in }

Legend

1) Install the inner liner to the front fender panel.

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.