Pre-fuel filter installation (4JJ3 without DPD)

1. Pre-fuel filter installation

1. Models with pre-fuel filter

1) Install the pre-fuel filter to the pre-fuel filter bracket.

Tightening torque: 20 N・m { 2.0 kgf・m / 15 lb・ft }

2) Connect the fuel hose to the pre-fuel filter.

2. Fuel air bleed

1) Open the engine hood.

2) Press the priming pump until it becomes hard.

Caution

  • Completely bleed air, as insufficient air bleeding may lead to engine malfunctions.

Legend

  1. Priming pump
  2. Fuel filter with sedimenter
Copyright Mazda Motor Corporation. All rights reserved.