1. Door lock installation
1) Install the door lock to the front door .
Tightening torque: 7.0 N・m { 0.7 kgf・m / 62 lb・in }
Legend
- Door lock
2) Connect the rod to the outside handle bracket and key cylinder.
3) Connect the connector to the door lock.
2. Glass-run rear channel installation
1) Install the glass-run rear channel to the front door.
Tightening torque: 9.0 N・m { 0.9 kgf・m / 80 lb・in }
Legend
- Glass-run rear channel
3. Waterproof sheet installation
1) Install the waterproof sheet to the front door.
4. Front door trim pad installation
1) Connect the door lock cable to the inside lever.
2) Install the front door trim pad to the front door.
3) Tighten the screws, and install the cover and garnish.
Tightening torque: 2.0 N・m { 0.2 kgf・m / 18 lb・in }
Models with power windows
Legend
- Clip position
- Cover
- Garnish
- Screw
Models without power windows
Legend
- Clip position
- Cover
- Screw
5. Door mirror cover installation
1) Install the door mirror cover to the front door.
Legend
- Clip
- Door mirror cover
6. Front door power window switch installation
1. Models with power windows
1) Connect the connector to the front door power window switch.
2) Install the front door power window switch to the front door trim pad.
3) Install the armrest to the front door trim pad.
For Australia
Legend
- Armrest
Except for Australia
Legend
- Armrest
7. Window regulator handle installation
1. Models without power windows
1) Install the locking pin and washer to the window regulator handle.
Legend
- Window regulator handle
- Locking pin
- Washer
2) Install the window regulator handle to the front door.
Caution
- The regulator handle should be installed at an installation angle of 45° against the horizontal direction when the door glass is completely closed.
Dimensions
a. 45°
8. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.