Passenger seat disassembly

1. Component views

Manual control seat (Without height control, separate headrest type)

Part name

  1. Headrest holder
  2. Front seat headrest
  3. Front seat back cover
  4. Front seat back pad
  5. Front seat back frame
  6. Bolt
  7. Reclining lever
  8. Reclining cover
  9. Nut
  10. Front seat cushion frame
  11. Bolt
  12. Seat slide adjuster
  13. Front buckle side seat belt
  14. Bolt
  15. Side cover
  16. Front seat cushion pad
  17. Front seat cushion cover
  18. Seat belt reminder sensor

Tightening torque

6: 46 N・m { 4.7 kgf・m / 34 lb・ft }

9: 21 N・m { 2.1 kgf・m / 15 lb・ft }

11: 46 N・m { 4.7 kgf・m / 34 lb・ft }

14: 40 N・m { 4.1 kgf・m / 30 lb・ft }

Bench seat

Part name

  1. Front seat back cover
  2. Front seat back pad
  3. Front seat back frame
  4. Bolt
  5. Reclining lever
  6. Screw
  7. Leg cover
  8. Reclining cover
  9. Bolt
  10. Front seat cushion frame
  11. Side cover
  12. Front seat cushion pad
  13. Front seat cushion cover
  14. Seat belt reminder sensor (center)
  15. Seat belt reminder sensor (LH)

Tightening torque

4: 46 N・m { 4.7 kgf・m / 34 lb・ft }

9: 46 N・m { 4.7 kgf・m / 34 lb・ft }

2. Front seat headrest removal

1) Remove the front seat headrest from the passenger seat.

3. Front buckle side seat belt removal

1. Bucket seat

1) Disconnect the connector from the front buckle side seat belt.

2) Disconnect the seat belt switch harness from the seat.

3) Remove the front buckle side seat belt from the seat.

Left side

Legend

  1. Front buckle side seat belt

4. Reclining cover removal

1) Remove the reclining lever from the passenger seat.

2) Remove the reclining cover and side cover from the passenger seat.

Note

  • Disengage the claw section and clip.

Bucket seat

Legend

  1. Reclining lever
  2. Reclining cover
  3. Side cover
  4. Claw section
  5. Clip

Bench seat

Legend

  1. Side cover
  2. Reclining cover
  3. Reclining lever

5. Front seat back removal

1) Remove the headrest holder from the front seat back.

Bucket seat

Legend

  1. Headrest holder (RH)
  2. Headrest holder (LH)
  3. Front seat back

2) For models with seat heaters, disconnect the connector.

3) Remove the front seat back from the front seat frame.

Bucket seat

Legend

  1. Front seat back
  2. Front seat frame

Bench seat

Legend

  1. Front seat back

6. Front seat back disassembly

1. Models without side airbags

Caution

  • For models with side airbags, do not disassemble the front seat back.

1) Remove the front seat back cover and front seat back pad from the front seat back frame.

Bucket seat

Legend

  1. Front seat back cover and front seat back pad
  2. Front seat back frame

Bench seat

Legend

  1. Front seat back cover and front seat back pad
  2. Front seat back frame

2) Remove the front seat back cover from the front seat back pad.

Note

  • Referring to the diagram, press the fastener on the front seat back pad side, and slowly raise the front seat back cover.

Legend

  1. Front seat back cover
  2. Fastener

Note

  • Referring to the diagram, disengage the hog ring.

Bucket seat front side

Legend

  1. Front seat back cover
  2. Front seat back pad
  3. Hog ring
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

Bench seat front side

Legend

  1. Front seat back cover
  2. Front seat back pad
  3. Hog ring
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

Bucket seat back side

Legend

  1. Hog ring
  2. Front seat back cover
  3. Front seat back pad
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

Bench seat back side

Legend

  1. Hog ring
  2. Front seat back cover
  3. Front seat back pad
  4. Front seat back cover
  5. Hog ring
  6. Front seat back pad

7. Seat cushion removal

1) Disconnect the connector as necessary.

2) Remove the resin hook of the seat cushion cover from the seat frame.

3) Pull the seat cushion cover of the seat cushion rear end out of the gap between the seat cushion and the seat back, and remove the seat cushion from the seat frame.

Bucket seat

Legend

  1. Seat cushion
  2. Seat frame

Bench seat

Legend

  1. Seat cushion
  2. Seat frame

8. Seat cushion disassembly

1) Remove the seat cushion cover from the seat cushion pad.

Note

  • Referring to the diagram, disengage the hog ring.

Bucket seat

Legend

  1. Hog ring
  2. Seat cushion cover
  3. Seat cushion pad
  4. Seat cushion cover
  5. Hog ring
  6. Seat cushion pad

Bench seat

Legend

  1. Hog ring
  2. Seat cushion cover
  3. Seat cushion pad
  4. Seat cushion cover
  5. Hog ring
  6. Seat cushion pad

Note

  • Referring to the diagram, hold the fastener on the seat cushion pad side, and slowly raise the seat cushion cover.

Legend

  1. Seat cushion cover
  2. Fastener

9. Seat slide adjuster removal

1. Bucket seat

1) Remove the cover from the seat cushion frame.

2) Remove the seat slide adjuster from the seat cushion frame.

Legend

  1. Cover
  2. Seat cushion frame
  3. Seat slide adjuster
Copyright Mazda Motor Corporation. All rights reserved.