MAF and IAT sensor installation (4JJ3 with DPD)

1) Install the MAF and IAT sensor to the air cleaner.

Tightening torque: 1.5 N・m { 0.2 kgf・m / 13 lb・in }

2) Connect the connector to the MAF and IAT sensor.

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.

1. Clear Learned Value (Fuel Mass Observer)

1) Turn ON the ignition switch.

2) Select the scan tool item.

3) Perform Clear Learned Value (Fuel Mass Observer) by following the on-screen instructions.

4) After Clear Learned Value (Fuel Mass Observer) is complete, turn OFF the ignition switch for 30 seconds.