Oil filter installation (RZ4E-TC)

Part name

Tightening torque

3: 25 N・m { 2.5 kgf・m / 18 lb・ft }

4: 25 N・m { 2.5 kgf・m / 18 lb・ft }

5: 25 N・m { 2.5 kgf・m / 18 lb・ft }

6: 30 N・m { 3.1 kgf・m / 22 lb・ft }

1) Install the oil cooler to the oil filter in the order shown in the diagram.

Tightening torque: 12 N・m { 1.2 kgf・m / 106 lb・in }

Legend

1) Install the oil filter and gasket to the cylinder block in the order shown in the diagram.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

Tightening torque: 30 N・m { 3.1 kgf・m / 22 lb・ft } Spring clip

1) Apply LOCTITE 262 to the threaded portion of the oil pressure switch.

2) Install the oil pressure switch and clip to the oil filter.

Tightening torque: 15 N・m { 1.5 kgf・m / 11 lb・ft }

Legend

3) Connect the connector to the oil pressure switch.

1) Install the oil filter element and O-ring to the cap.

Legend

2) Install the cap and oil filter element to the oil filter.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

3) Connect the harness clip to the bracket.

Legend

1) Install the left side engine foot to the cylinder block.

Tightening torque: 52 N・m { 5.3 kgf・m / 38 lb・ft }

Legend

1) Install the generator bracket to the cylinder block.

Tightening torque: 52 N・m { 5.3 kgf・m / 38 lb・ft }

Refer to "1.Engine 1B.Mechanical(RZ4E-TC) engine installation".