1. Turbine speed sensor installation
1) Install the turbine speed sensor to the transmission case.
Caution
- Be careful not to damage the turbine speed sensor.
Tightening torque: 5 N・m { 0.5 kgf・m / 44 lb・in }
2. Engine harness connect
1) Connect the engine harness to the turbine speed sensor.
3. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.