Primary specifications of heating, ventilation air conditioning

1) Primary specifications of ventilator and cooler

Models with auto A/C

Item			Specifications
Evaporator		Cooling control system	Vapor compression method
		Heat discharge	5.12 kW (4,405 kcal/h)
		Air supply	500 m3/h
Evaporator core		Model	BRS type (Beneficial Refrigerant Stream type)
		Effective core dimensions	280 x 191 x 38 mm (11.0 x 7.5 x 1.5 in)
Expansion valve		Model	Uniform external pressure type (Box type)
Thermo switch		Model	Fin type
		Operating temperature	<When normal> OFF: 2.7°C (36.9°F) ON: 5.0°C (41.0°F) <During Auto ECO control> OFF: 1.5 to 4.5°C (34.7°F to 40.1°F) ON: 2.5 to 5.5°C (36.5°F to 41.9°F)
Condenser		Model	MF type sub-cooling type
		Heat discharge	18.4 kW (15,824 kcal/h)
Receiver dryer		Absorbent	Synthetic zeolite 40 g (1.4 oz)
		Content	190 cm3 (5.4 lmp fl oz)
Pressure switch		Operating pressure	Low-pressure control ON, 176 to 216 kPa {1.8 to 2.2 kgf/cm2 / 26 to 31 psi} OFF, 195 to 255 kPa {2.0 to 2.6 kgf/cm2 / 28 to 37 psi} High-pressure control ON, 2,840 to 3,040 kPa {29.0 to 31.0 kgf/cm2 / 412 to 441 psi} OFF, 2,050 to 2,650 kPa {20.9 to 27.0 kgf/cm2 / 297 to 384 psi}
Refrigerant filling amount		HFC-134a	530 ± 50 g {1.2 ± 0.1 lb}
Compressor		Type	Swashplate type
		Discharge amount	110 cm 3/rev (3.1 lmp fl oz)
		Maximum RPM	6000 rpm
		Weight	2.92 kg
		Specified compressor oil amount	60 cm3: ND-OIL8
Magnetic clutch (4JJ3, except M/T models (Euro 5 or above))		Rated voltage	12 V
		Power consumption	40 W
		Minimum pull-in voltage	8 V At 20°C
		Static transfer torque	34 N・m or more { 3 kgf・m or more }
		Weight	1.56 kg
Magnetic clutch (4JJ3, M/T models (Euro 5 or above))		Rated voltage	12 V
		Power consumption	28 W
		Minimum pull-in voltage	8 V At 20°C
		Static transfer torque	41 N・m or more { 4 kgf・m or more }
		Weight	1.61 kg
Magnetic clutch (RZ4E)		Rated voltage	12 V
		Power consumption	28 W
		Minimum pull-in voltage	8 V At 20°C
		Static transfer torque	41 N・m or more { 4.2 kgf・m or more }
		Weight	1.90 kg
Temperature control	Outside air temperature sensor		Resistance: 1.7 kΩ, 25°C (77°F)
	Inside air temperature sensor		Resistance: 1.7 kΩ, 25°C (77°F)
	Sun sensor		Photodiode
	Control device	Auto A/C control unit	Built-in microcomputer
		Actuator	Intake actuator
			Mode actuator
			Mix actuator
			Rear ventilation duct actuator

Models with manual A/C

Item			Specifications
Evaporator		Cooling control system	Vapor compression method
		Heat discharge	5.14 kW (4,420 kcal/h)
		Air supply	500 m3/h
Evaporator core		Model	Laminate louver fin type
		Effective core dimensions	295 x 235 x 40 mm (11.6 x 9.3 x 1.6 in)
Expansion valve		Model	Uniform external pressure type (Box type)
Thermo switch		Model	Electric type, electronic thermostat
		Operating temperature	OFF: 2.7°C (36.9°F) ON: 5.0°C (41.0°F)
Condenser		Model	MF type sub-cooling type
		Heat discharge	18.4 kW (15,824 kcal/h)
Receiver dryer		Absorbent	Synthetic zeolite 40 g (1.4 oz)
		Content	190 cm3 (5.4 lmp fl oz)
Pressure switch		Operating pressure	Low-pressure control ON, 176 to 216 kPa {1.8 to 2.2 kgf/cm2 / 26 to 31 psi} OFF, 195 to 255 kPa {2.0 to 2.6 kgf/cm2 / 28 to 37 psi} High-pressure control ON, 2,840 to 3,040 kPa {29.0 to 31.0 kgf/cm2 / 412 to 441 psi} OFF, 2,050 to 2,650 kPa {20.9 to 27.0 kgf/cm2 / 297 to 384 psi}
Refrigerant filling amount		HFC-134a	530 ± 50 g {1.2 ± 0.1 lb}
Compressor		Type	Vane rotary type
		Discharge amount	83 cm3/rev (2.34 lmp fl oz)
		Maximum RPM	7000 r/min (Instantaneous 8500 r/min)
		Weight	2.41 kg
		Specified compressor oil amount	150 cm3: DH-PR
Magnetic clutch (4JJ3, except M/T models (Euro 5 or above))		Rated voltage	12 V
		Power consumption	40 W
		Minimum pull-in voltage	7.5 V At 20°C
		Weight	1.85 kg
Magnetic clutch (4JJ3, M/T models (Euro 5 or above))		Rated voltage	12 V
		Power consumption	40 W
		Minimum pull-in voltage	7.5 V At 20°C
		Weight	1.73 kg
Magnetic clutch (RZ4E)		Rated voltage	12 V
		Power consumption	40 W
		Minimum pull-in voltage	7.5 V At 20°C
		Static transfer torque	35 N⋅m {3.6 kgf⋅m / 26 lb⋅ft} or more
		Weight	2.46 kg