CD/DVD player removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Audio and navigation system removal

1. Models equipped with display units

1) Remove the display unit as a set with the bezel from the instrument panel.

Caution

  • When removing the display unit, place a cloth to the instrument panel.
  • If a cloth is not used, the surface of the instrument panel may be damaged.

Legend

  1. Bezel
  2. Display unit
  3. Clip

2) Disconnect the connector from the display unit.

3. Instrument panel passenger-side upper cover removal

1) Remove the instrument panel passenger-side upper cover from the instrument panel.

High grade type (RHD)

Legend

  1. Instrument panel passenger-side upper cover
  2. Screw

High grade type (LHD)

Legend

  1. Instrument panel passenger-side upper cover
  2. Screw

4. CD/DVD player removal

1) Remove the CD/DVD player from the instrument panel.

Legend

  1. CD/DVD player
  2. Screw

2) Disconnect the connector from the CD/DVD player.

3) Remove the bracket from the instrument panel.

Legend

  1. Bracket
  2. Screw

4) Remove the bracket from the CD/DVD player.

Legend

  1. CD/DVD player
  2. Bracket
  3. Screw
Copyright Mazda Motor Corporation. All rights reserved.