Glow control unit installation (4JJ3 with DPD)

1) Install the glow control unit to the battery bracket.

Tightening torque: 9.4 N・m { 1.0 kgf・m / 83 lb・in }

Legend

2) Connect the connector to the glow control unit.

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.