Slave cylinder reassembly (MVL)

Part name

Tightening torque

7: 8 N・m { 0.8 kgf・m / 71 lb・in }

Part name

Tightening torque

6: 8 N・m { 0.8 kgf・m / 71 lb・in }

1) Clean the cylinder body.

2) Apply brake fluid to the cylinder bore.

3) Install the bleeder screw to the cylinder body.

Tightening torque: 8 N・m { 0.8 kgf・m / 71 lb・in }

4) Install the spring to the cylinder body.

5) Install the piston cup to the piston.

6) Apply COSMO rubber grease or equivalent to the piston cup sliding surface.

7) Install the piston to the cylinder body.

8) Install the push rod to the cylinder body.

9) Install the boot to the cylinder body.