Rear pillar trim cover (crew cab) installation

1. Component views

Crew cab

Part name

  1. Front pillar trim cover
  2. Front door finisher
  3. Front tongue side seat belt
  4. Center pillar upper trim cover
  5. Assist grip
  6. Rear door finisher
  7. Rear upper trim cover
  8. Rear lower trim cover
  9. Rear end upper trim cover
  10. Rear end trim cover
  11. Rear tongue side seat belt
  12. Rear tongue side center seat belt
  13. Rear sill plate
  14. Center pillar lower trim cover
  15. Front sill plate
  16. Assist grip
  17. Dash side trim pad

2. Rear pillar trim cover installation

1) Install the rear pillar upper trim cover to the rear pillar.

Legend

  1. Rear pillar upper trim cover
  2. Clip
  3. Hook

2) Install the rear pillar lower trim cover to the rear pillar.

Legend

  1. Claw section
  2. Rear pillar lower trim cover
  3. Clip

3. Rear end upper trim cover installation

1) Install the rear end upper trim cover to the body panel.

Caution

  • For models with center top tethers (bracket type), install while bending the end of the rear end upper trim to an extent that it will not get damaged.

Models with center top tethers (bracket type)

Legend

  1. Seat belt guide cover
  2. Rear end upper trim cover
  3. Clip
  4. Claw section
  5. Hook
  6. Bend the end of the rear end upper trim cover.
  7. Install the rear end upper trim.
  8. Center top tether (Bracket type)

Models without center top tethers (bracket type)

Legend

  1. Seat belt guide cover
  2. Rear end upper trim cover
  3. Clip
  4. Claw section
  5. Hook

4. Rear door finisher installation

1) Install the rear door finisher to the body.

5. Rear sill plate installation

1) Install the rear sill plate to the floor.

Legend

  1. Rear sill plate
  2. Clip
  3. Claw section
Copyright Mazda Motor Corporation. All rights reserved.