Oil pump installation (4JJ3 without DPD)

Part name

Tightening torque

1: 25 N・m { 2.5 kgf・m / 18 lb・ft }

1) Apply engine oil to the oil pump gear.

2) Install the oil pump to the timing gear case.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

Legend

1) Referring to the diagram, apply ThreeBond 1207B to the timing gear case.

Legend

2) Install the gasket to the gear case cover.

3) Install the gear case cover to the timing gear case.

Tightening torque: 8.0 N・m { 0.8 kgf・m / 71 lb・in }

4) Install the cover to the gear case cover.

Tightening torque: 10.0 N・m { 1.0 kgf・m / 89 lb・in }

1) Install the vacuum pump to the gear case cover.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

2) Install the vacuum pump oil pipe to the vacuum pump and cylinder block.

Tightening torque: 12 N・m { 1.2 kgf・m / 106 lb・in }

3) Install the vacuum pipe as a set with the vacuum hose to the timing gear case and vacuum pump.

Tightening torque: 32 N・m { 3.3 kgf・m / 24 lb・ft } Vacuum pump side

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft } Timing gear case side

1) Install the power steering oil pump to the timing gear case.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

Legend

2) Install the power steering oil hose to the bracket.

Legend

1) Install the noise cover to the timing chain lower cover.

Tightening torque: 10.0 N・m { 1.0 kgf・m / 89 lb・in }

Refer to "1.Engine 1B.Mechanical(4JJ3 without DPD) Crankshaft pulley installation".