1. Rain and light sensor installation
1. Models with stereo cameras
Caution
- Do not subject the stereo camera to a strong impact.
1) Clean the area in the front windshield glass where the rain and light sensor will be attached using gasoline.
2) Install the rain and light sensor to the front windshield glass.
Caution
- Do not reuse the rain and light sensor
Legend
- Claw section
- Rain and light sensor
3) Connect the connector to the rain and light sensor.
4) Install the stereo camera cover to the front windshield glass.
Legend
- Stereo camera cover
5) Slide the stereo camera cover in the direction of the arrow.
Caution
- Make sure that the claw section is locked.
Legend
- Claw section
- Stereo camera cover
6) Install the stereo camera cover lid to the stereo camera cover.
Legend
- Claw section
- Stereo camera cover lid
2. Models without stereo cameras
1) Clean the area in the front windshield glass where the rain and light sensor will be attached using gasoline.
2) Install the rain and light sensor to the front windshield glass.
Caution
- Do not reuse the rain and light sensor
Legend
- Claw section
- Rain and light sensor
3) Connect the connector to the rain and light sensor.
4) Install the cover to the front windshield glass.
Legend
- Cover
2. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.