License plate light bulb removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. License plate light removal

1) Remove the license plate light from the panel.

Legend

  1. License plate light
  2. Panel

Legend

  1. Panel

3. License plate light bulb removal

1) Remove the license plate bulb from the license plate light.

Legend

  1. Socket
  2. License plate bulb
Copyright Mazda Motor Corporation. All rights reserved.