Engine hood removal

1. Component views

Engine hood

Part name

  1. Engine hood
  2. Hood hinge
  3. Bolt
  4. Engine hood front seal
  5. Stopper rubber

Tightening torque

3: 6.5 N・m { 0.7 kgf・m / 58 lb・in }

2. Stopper rubber removal

1) Remove the stopper rubber from the engine hood.

Legend

  1. Engine hood
  2. Stopper rubber

3. Engine hood front seal removal

1) Remove the engine hood front seal from the engine hood.

Legend

  1. Engine hood
  2. Engine hood front seal

4. Engine hood removal

1) Open the engine hood.

Note

  • Before removing the hinge from the engine hood, put a marking of the hinge location for putting the hinge back in place.

2) Remove the hinge bolt from the engine hood.

Copyright Mazda Motor Corporation. All rights reserved.