TCCM installation

1. TCCM installation

1) Install the TCCM to the reinforcement.

Tightening torque: 7 N・m { 0.7 kgf・m / 62 lb・in }

2) Connect the connector to the TCCM.

RHD

LHD

2. ECM installation

Refer to "1.Engine 1Z.Engine Electrical Control(4JJ3 with DPD) ECM installation".

Refer to "1.Engine 1Z.Engine Electrical Control(4JJ3 without DPD) ECM installation".

Refer to "1.Engine 1Z.Engine Electrical Control(RZ4E-TC) ECM installation".

3. Instrument panel passenger-side lower cover installation

1) Connect the connector to the instrument panel passenger-side lower cover.

2) Install the instrument panel passenger-side lower cover to the instrument panel.

RHD

Legend

  1. Instrument panel passenger-side lower cover
  2. Clip

LHD

Legend

  1. Instrument panel passenger-side lower cover
  2. Clip

4. Glove box installation

1) Install the glove box to the instrument panel.

RHD

Legend

  1. Glove box

LHD

Legend

  1. Glove box

5. Preliminary and post procedures

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.

Copyright Mazda Motor Corporation. All rights reserved.