1. Parking brake switch installation
1) Install the parking brake switch to the parking brake lever.
Tightening torque: 1.18 to 1.76 N⋅m {0.120 to 0.180 kgf⋅m / 10.4 to 15.6 lb⋅in}
Base grade console specifications (RHD models (LHD models are opposite))
Legend
- Parking brake lever
- Bolt
- Equalizer
- T-end
- Parking brake cable
- Adjust nut
- Parking brake switch
- Screw
Except base grade console specifications (RHD models (LHD models are opposite))
Legend
- Parking brake lever
- Bolt
- Equalizer
- T-end
- Parking brake cable
- Adjust nut
- Parking brake switch
- Screw
2. Console box installation
1. Models with console boxes
Refer to "9.Body, Cab, Accessories 9L.Exterior, Interior Trim console box installation".
3. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.