Rear step bumper installation

1. Component views

Rear step bumper

Part name

  1. Step pad center
  2. Step pad side
  3. Shell
  4. Bolt
  5. Bolt
  6. Back bar
  7. Reinforcement

Tightening torque

4: 51 N・m { 5.2 kgf・m / 38 lb・ft }

5: 150 N・m { 15.3 kgf・m / 111 lb・ft }

2. Rear step bumper installation

1) Install the reinforcement to the vehicle.

Tightening torque: 150 N・m { 15.3 kgf・m / 111 lb・ft }

Legend

  1. Reinforcement

2) Install the shell to the reinforcement.

Legend

  1. Step pad side
  2. Clip
  3. Shell

3) Install the step pad center to the reinforcement.

Legend

  1. Step pad center
  2. Claw section
Copyright Mazda Motor Corporation. All rights reserved.