ICR relay removal (RZ4E-TC)

1. Component views

ICR relay

Part name

  1. ICR relay
  2. Nut
  3. Bracket

Tightening torque

2: 8.6 N・m { 0.9 kgf・m / 76 lb・in }

2. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

3. ICR relay removal

1) Disconnect the connector from the ICR relay.

2) Disconnect the battery cable from the B-terminal and M-terminal.

Legend

  1. B-terminal
  2. Battery cable (Battery side)
  3. Battery cable (Starter motor side)
  4. M-terminal
  5. Connector

3) Remove the ICR relay from the bracket.

Legend

  1. ICR relay
  2. Bracket
Copyright Mazda Motor Corporation. All rights reserved.