1. EGR valve installation
1) Install the EGR valve and gasket to the inlet manifold.
Caution
- Do not reuse the gasket.
Tightening torque: 27 N・m { 2.8 kgf・m / 20 lb・ft } Nut
Tightening torque: 24 N・m { 2.4 kgf・m / 18 lb・ft } Bolt
2. EGR valve connect
1) Connect the connector to the EGR valve.
3. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.