FRP sensor installation (RZ4E-TC)

Part name

Tightening torque

1: 35 N・m { 3.6 kgf・m / 26 lb・ft }

3: 172 N・m { 17.5 kgf・m / 127 lb・ft }

1) Install the FRP sensor to the common rail (fuel rail).

Tightening torque: 35 N・m { 3.6 kgf・m / 26 lb・ft }

2) Connect the connector to the FRP sensor.

Legend

1) Install the engine cover to the engine.

Legend

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.