Speaker microphone removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Map light removal

1) Insert a small flathead screwdriver, etc., into the gap between the head lining and the map light to unlock the claw section.

2) Remove the map light from the head lining.

Caution

  • Do not remove the map light with the claw section locked.

Legend

  1. Claw section
  2. Map light

3) Disconnect the connector from the map light.

3. Speaker microphone removal

1) Remove the speaker microphone from the map light.

Legend

  1. Speaker microphone
  2. Map light
Copyright Mazda Motor Corporation. All rights reserved.