CKP sensor installation (4JJ3 without DPD)

1) Install the CKP sensor to the cylinder block.

Tightening torque: 5.0 N・m { 0.5 kgf・m / 44 lb・in }

Legend

2) Connect the connector to the CKP sensor.

Refer to "1.Engine 1J.Electrical(4JJ3 without DPD) starter motor installation".

1. Post procedures

1) Lower the vehicle.

2) Connect the battery cable to the battery negative terminal.

3) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

4) Close the engine hood.