Cruise control steering wheel switch inspection

1. Visual inspection

1) Inspect for cruise control steering wheel switch illumination when the lighting switch is turned to ON.

2. Resistance measurement

1) Measure the resistance between the connector terminals using a DMM when the cruise control steering wheel switch is operated.

Models with variable speed limiters

Switch operation	Terminal No.	Resistance
Main switch pressed and held	5-14	349 Ω
CANCEL switch pressed and held		196 Ω
SET/- switch pressed and held		702 Ω
SET/+ switch pressed and held		1.2 kΩ
RES switch pressed and held	5-15	11.7 kΩ
Inter-vehicular distance switch pressed and held		11.2 kΩ
LKAS switch pressed and held		12.2 kΩ
MID mode L switch pressed and held	4-7	2.9 kΩ
MID mode confirm switch pressed and held		461 Ω
MID mode R switch pressed and held		9.2 kΩ

Models without variable speed limiters

Switch operation	Terminal No.	Resistance
Main switch pressed and held	6-14	0 Ω
CANCEL switch pressed and held	5-13	0 Ω
SET/- switch pressed and held		1 kΩ
RES/+ switch pressed and held		3 kΩ
MID mode L switch pressed and held	4-7	2.9 kΩ
MID mode confirm switch pressed and held		461 Ω
MID mode R switch pressed and held		9.2 kΩ