1. Transfer oil drain
1) Remove the drain plug and filler plug from the transfer case.
2) Drain the transfer oil from the transfer.
Note
- After draining the oil, apply the filler plug and drain plug to prevent the intrusion of foreign material.
2. Transfer oil inspection
1) Inspect the transfer oil.
- Oil level
- Presence of metal fragments
- Presence of foreign materials
3. Transfer oil filling
1) Tighten the drain plug to the specified torque.
Caution
- Do not reuse the O-ring.
Tightening torque: 39 N・m { 4.0 kgf・m / 29 lb・ft }
2) Remove the filler plug.
3) From the filler plug hole, fill oil up to the lower edge of the filler plug hole.
Oil to be used
BESCO GEAR OIL TRANSAXLE 5W-30 or equivalent
1.3 L { 0.34 US gal / 0.29 Imp.gal } Oil capacity [Reference value]
Legend
- Filler plug
- Drain plug
- Oil surface
- Lower surface of the hole
4) Tighten the filler plug to the specified torque.
Caution
- Do not reuse the O-ring.
Tightening torque: 39 N・m { 4.0 kgf・m / 29 lb・ft }