1. CKP sensor installation
1) Apply soapy water to the O-ring.
2) Install the CKP sensor to the flywheel housing.
Tightening torque: 5.0 N・m { 0.51 kgf・m / 44.3 lb・in }
Legend
- O-ring
- CKP sensor
3) Connect the connector to the CKP sensor.
2. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.