Engine hood installation

Part name

Tightening torque

3: 6.5 N・m { 0.7 kgf・m / 58 lb・in }

1) Align the hinge to the marking position placed during removal, and temporarily secure.

2) Adjust the clearance between the engine hood and the fender to the standard value.

Dimensions

a. Clearance: 4.0 mm {0.16 in}

b. Height, level difference: -1.5 mm ｛-0.06 in｝

3) Final tighten the hinge bolt to the engine hood.

Tightening torque: 6.5 N・m { 0.7 kgf・m / 58 lb・in }

1) Install the engine hood front seal to the engine hood.

Legend

1) Install the stopper rubber to the engine hood.

Legend

1) Turn the hood rest to adjust its height, and adjust the level difference against the engine hood.

Legend