1. Using the thread locking agent
| Type |
Color |
| LOCTITE 242 |
Blue |
| LOCTITE 262 |
Red |
| LOCTITE 263 |
Red |
| LOCTITE FMD-127 |
Blue |
Caution
- Thoroughly remove dirt, moisture, and grease from the threaded portions of the parts to which thread locking adhesive will be applied.
Also, if there is any adhesive residue, remove it with a brush, etc. - Before tightening, verify that the cleaned sections are dry.
- After tightening, do not apply excessive torque or vibration for at least 1 hour until the thread locking adhesive hardens.
- If applying thread locking adhesive to bolts, apply to the fitting section with the female screw.
