1. Transmission oil vehicle inspection
1) Remove the transmission filler plug.
2) Inspect if the oil is filled up to the lower surface of the hole by looking through the filler plug hole.
RZ4E
Legend
- Filler plug
- Drain plug
- Filler plug hole
- Lower surface of the hole
- Oil surface
4JJ3
Legend
- Filler plug
- Drain plug
- Filler plug hole
- Lower surface of the hole
- Oil surface
3) If the oil level is not within the specified range, add transmission oil.
4) Tighten the filler plug to the specified torque.
Caution
- Do not reuse the O-ring.
- If the transmission is disassembled and reassembled, perform a test run after refilling with transmission oil. Add the oil through the filler plug hole up to the lower edge of the hole.
Tightening torque: 39 N・m { 4.0 kgf・m / 29 lb・ft }