Dome light bulb removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Dome light bulb removal

1) Remove the dome light lens from the dome light.

2) Remove the dome light from the head lining.

Legend

  1. Screw
  2. Dome light

3) Remove the dome light bulb from the dome light.

Copyright Mazda Motor Corporation. All rights reserved.