Battery sensor installation (RZ4E-TC)

1) Install the battery sensor to the battery.

Tightening torque: 12 N・m { 1.2 kgf・m / 106 lb・in }

Legend

2) Connect the connector to the battery sensor.

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.