Rear step bumper removal

1. Component views

Rear step bumper

Part name

  1. Step pad center
  2. Step pad side
  3. Shell
  4. Bolt
  5. Bolt
  6. Back bar
  7. Reinforcement

Tightening torque

4: 51 N・m { 5.2 kgf・m / 38 lb・ft }

5: 150 N・m { 15.3 kgf・m / 111 lb・ft }

2. Rear step bumper removal

1) Remove the step pad center from the reinforcement.

Legend

  1. Step pad center
  2. Claw section

2) Remove the shell from the reinforcement.

Legend

  1. Step pad side
  2. Clip
  3. Shell

3) Remove the reinforcement from the vehicle.

Legend

  1. Reinforcement
Copyright Mazda Motor Corporation. All rights reserved.