Fuel drain water (RZ4E-TC)

1. Fuel drain water

If the warning light illuminates, refer to the following procedure to drain the water.

Caution

  • If the warning light frequently illuminates, drain the fuel in the fuel tank, then perform the work.
  • When draining the fuel from the fuel tank, make sure to stop the engine.
  • Make sure that no flammable objects are around the container when draining the fuel.

1) Prepare pan.

2) Install the clear hose to the drain plug on the fuel filter.

Note

  • Place the container at the end of the hose attached to the drain plug.

3) Loosen the drain plug to drain moisture and deposits.

4) Push the priming pump several times to check for fuel leakage.

5) Tighten the drain plug by hand until it makes full contact with the element case.

6) Turn ON the ignition switch for 15 seconds.

7) Confirm that the warning light turns OFF.