Rear pillar trim cover (extended cab) installation

Part name

1) Install the rear pillar upper trim cover to the rear pillar.

Legend

2) Install the seat belt upper anchor bolt to the rear pillar.

Tightening torque: 46 N・m { 4.7 kgf・m / 34 lb・ft }

Legend

3) Install the rear pillar lower trim cover to the rear pillar.

Legend

4) Install the seat belt lower anchor bolt to the floor panel.

Tightening torque: 46 N・m { 4.7 kgf・m / 34 lb・ft }

Legend

1) Install the rear end trim cover to the body panel.

Legend

1) Install the front door finisher to the body.

1) Install the front sill plate to the floor.

Legend