Fuel tank unit removal (4JJ3 without DPD)

1. Component views

Fuel tank unit

Part name

  1. Retainer ring
  2. Fuel tank unit
  3. Fuel tank unit seal
  4. Fuel tank

2. Fuel tube removal

Refer to "1.Engine 1C.Fuel System(4JJ3 without DPD) fuel tube removal".

3. Fuel tank unit removal

1) Remove the retainer ring from the fuel tank using the special tool.

Caution

  • Do not reuse the retainer ring.
  • Cover the retainer ring with a shop cloth, etc.
  • Breakage may occur if the special tool comes into contact with the ribbed bottom portion of the retainer ring.


SST: 5-8840-3263-0 - Wrench;Chain

2) Remove the fuel tank unit from the fuel tank.

Caution

  • The fuel tank unit seal cannot be reused.
  • Remove it gradually not to distort the float arm.
Copyright Mazda Motor Corporation. All rights reserved.