Rearview camera removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Tail gate cover removal

1) Remove the tailgate cover from the tailgate.

3. Rearview camera removal

1) Disconnect the connector from the rearview camera.

2) Remove the rearview camera from the tail gate.

Legend

  1. Tail gate
  2. Rearview camera
  3. Bolt
  4. Connector

3) Remove the rearview camera cable from the tail gate and body.

Legend

  1. Rearview camera
  2. Bolt
  3. Outside handle
  4. Rear camera cable
Copyright Mazda Motor Corporation. All rights reserved.