Clutch switch installation (MVL)

1) Install the clutch switch to the clutch pedal assembly.

2) Connect the harness connector to the clutch switch.

1) Loosen the lock nut using a wrench.

2) Turn the clutch switch to adjust the clearance so that it is within the standard range.

Standard: 0.5 to 1.5 mm { 0.020 to 0.059 in } Clearance

3) After adjustment, tighten the lock nut.

Legend

Standard value

a: 0.5 to 1.5 mm { 0.020 to 0.059 in } Clearance

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".