Oil pan removal (4JJ3 without DPD)

1. Component views

Oil pan (2WD models)

Part name

  1. Oil pan
  2. Nut
  3. Gasket
  4. Drain plug

Tightening torque

2: 22 N・m { 2.2 kgf・m / 16 lb・ft }

4: 44 N・m { 4.5 kgf・m / 32 lb・ft }

Oil pan (4WD models)

Part name

  1. Oil pan
  2. Bolt
  3. Gasket
  4. Drain plug

Tightening torque

2: 22 N・m { 2.2 kgf・m / 16 lb・ft }

4: 44 N・m { 4.5 kgf・m / 32 lb・ft }

2. Preliminary and post procedures

1. Preliminary procedures

1) Raise the vehicle.

3. Underguard removal

Refer to "9.Body, Cab, Accessories 9G.Hood, Fenders, Doors underguard removal".

4. Engine oil drain

1) Remove the drain plug from the oil pan, and drain the engine oil to a pan.

2) Install the drain plug to the oil pan.

Tightening torque: 44 N・m { 4.5 kgf・m / 32 lb・ft }

Caution

  • Do not reuse the gasket.
  • Do not forget to tighten the drain plug.

5. Oil pan removal

1) Remove the oil pan from the crankcase.

Copyright Mazda Motor Corporation. All rights reserved.